Baan EDM Parameters

Maintain EDM Parameters

Session No: tiedm0100m000
Application: This session define parameters for EDM Module
Field Data:
1. Series in ECOs
When you create an engineering change order ,this parameter determines whether the
order number is a consecutive 1-digit/2-digit number, or an entirely free order number.
One Digit The change order has a consecutive 1-digit number.
Two Digits The change order has a consecutive 2-digit number.
No Series The change order number can be freely defined.
2. Customize Copied Item
When an engineering bill of material is copied to a customized production bill of material
in the sessions "Maintain EBOM Copy Data (tiedm1220m000)" and "Finalize
Engineering Data (tiedm3240m000)", several decision factors may cause a standard item
to be copied to a project. These decision factors are covered by the method
"Determination of Copy Method EBOM -> PBOM".
 The parameter determines whether the standard item in the customized bill of material
remains standard or becomes a customized item. In the latter case, the standard bill of
material as well as the standard routing are also copied to the project.
If Yes then, the standard item copied to a customized production BOM line for a certain
project becomes a customized item, and both the corresponding standard BOM and the
standard routing are copied to the related project.
If No then the standard item remains a standard item after it is copied to the customized
production BOM.
3. PBOM History
 In the session "Maintain Production BOMs (tibom1110m000)" it is possible to include
several BOM lines per position number. Each line is provided with a sequence number
(see the field "Sequence Number"). When engineering BOMs are copied to production
BOMs, the value of this field determines whether the existing BOM lines must be
overwritten, or whether new BOM lines must be added, each with their own sequence
number.
Yes When the engineering BOM is copied to the production BOM using the sessions
"Maintain EBOM Copy Data (tiedm1220m000)" and "Finalize Engineering Data
(tiedm3240m000)", the old BOM data will be retained.
No All old BOM data will be overwritten.
4. Directory Name for Drawing
 The directory on your (UNIX) system where the drawing files are located.
5. Display Drawing
 A shell command causing the drawing to be displayed in a window.